Hi, everybody!

This guide will help to show you how to position\re-position the props within the Augmented Reality software.

First things first, you will need to launch the AR Fotobooth 3D Editor software which can be found in C:\Program Files\FotoMaster\Foto Master Augmented Reality Photo Booth\ARPhotoBooth

Note: You can do this with the Augmented Reality software running simultaneously so you can quickly switch between interfaces to see the results and make further changes until completely satisfied.

Once the user interface completes the initial boot up, you can start to adjust the positions of the props. Simply select the prop from the list and then modify the X (right-left) and Y (up-down) values in the bottom right corner under Model Position Correction.

Additionally, you can select the size and starting position of the prop (Pos: Head, Eye, Body, Right Hand, Left Hand, Between Hands) and adjust it from that position. 

Once you have the prop in the desired position, don't forget to hit Save.

As this is a repetitive process, you will need to restart the Augmented Reality software after each change is made in the 3D Editor for the changes to take effect.