Hi owners!

In this video, we will show you how to calibrate your printer for any label roll.

[Can't see the video? Click here to watch on YouTube]

Download and install the latest Firmware: TM-C3500 Firmware Updater

After the installation

1. Open up the Color Cartridges chamber and remove the rubber protector of the DSW:

2. Push pin number 3 upwards:

3. Download the following:

• Epson C3500 Driver V2.3
  
• PMW_2 Media Definition

Set up the printer's driver by opening “Devices and Printers” from the Windows Control Panel.

1. Right-click on the Epson C3500 printer driver and select “Printing Preferences”

2. Click on “Media Definition”

3. Import The “PMW_2.xml”

4. After Loading click "Close". The Media name and definition should look like this:

5. Go to the Options tab and adjust the print position “Horizontal -0.02”. Make sure the "Borderless Printing" box is checked.

6. Click “Printer utilities” and select “Printer Setting Utility” > "Printer Settings Utility(P)"

7. Run Label Gap detection adjustment:

8. Click “Paper Feed Adjustment”

9. Click “Print Start Position Adjustment (Vertical Direction) and set to -2

10. Open “Print Start Position Adjustment (Horizontal Direction) and set to -4