Hello Mirror Me Booth owners!

In this article, we will show you how to calibrate your screen.


Before you calibrate, make sure to set your Display Settings properly, and make sure your touch screen device is connected directly to the computer via USB port.


TABLE OF CONTENTS


Touch Screen Calibration Using Touch Service (Recommended):

1. Make sure your touch screen is connected directly to the computer's USB port.


2. Download the TouchService driver from here and open the application.


3. Open your Task Manager > More details:


4. Go to the Startup Tab > Fine TouchService > Right-Click and Disable (this will prevent the touch screen to reset the calibration after every computer startup).


5. Open Touch Service, click "Calibration" and touch the 4 "targets" that will show up on the corners of your screen.


Touch Screen Calibration Using Windows Tool:

1. Download this desktop shortcut and place it on your desktop.


2. Press Calibrate


3. Tap the targets each time they appear on the screen:



4. Once done, click Yes to save the calibration data.


>>> You can also use this video for reference <<<


Touch Screen Calibration Using PQLabs Tool (for booths purchase before June 2018):

1. Download the PQLabs Multi-touch Platform driver from here and open the application.

2. Click "Calibrate Position" and touch the 4 pluses (+) that will show up on the corners of your screen.


>>> You can also use this video for reference <<<