Hi, owners!

This article will show you how to work with the NAYAX integration on your Foto Master Photo Booth software.

Drivers Installation:

A few drivers need to be pre-installed, please find all 4 Vcredist drivers attached at the bottom of this article, download and install them.

Finding The COM Port Number:

For the software to synchronize with the NAYAX device, you need to select the COM Port it's connected to. 

1. On your desktop, go to: Control Panel > View Devices and Printers > locate the Chipi-X device.

*If the Chipi-X device appears to have an error, install the CMD setup driver attached at the bottom of this article.

2. Right-Click on Chipi-X > Properties > Hardware - and see the COM port number:

Working With The Software:

1. Open the Foto Master Photo Booth software and select your preset.

2. Go to the Globals tab > Pay Per Play > Enable NAYAX. 

3. Select the right COM port number, and Save.

* Note that the status should be Active. Please contact the support team to assign your NAYAX device serial number to your Mirror Me software license key.

4. On your preset's workflow, select the Animation state you want to present before the users place their payment, and select the state's "Next State Trigger" to be Payment.

In the following workflow, we decided to "Swipe Card To Start" the preset. This means that if the user wants to start the workflow, he\she will need to swipe their credit card on the machine.

We incorporated several animations specifically for this feature in the Preset Pack: C:\MirrorMeBooth\Animations\Nayax

5. Set the amount you want to charge (in cents).

That's it, you're good to go!