Mirror Me Booth: Setup Demonstration
This video walks through the complete setup process for the Mirror Me Booth: from unboxing and assembly to powering on for the first time.
Can't see the video? Watch on YouTube
What This Video Covers
- Frame assembly and panel attachment
- Connecting the display and computer
- Attaching the camera and strobe
- Connecting the printer
- Powering on and verifying all connections
Tip: Keep your setup checklist open alongside the video so you can check off each step as you go.
Next Steps
- Setup Checklist: Step-by-step checklist to verify everything is connected correctly
- Software Setup: Log in to FMX and run your first test session
Was this helpful?
Related articles
Mirror Me Booth: Turn Key Package
Congratulations on your Mirror Me Booth! 🎉 Your Turn-Key package includes the full booth, computer, camera, printer, and starter media. Complete Package Contents ItemWhat it's for
Mirror Me Booth: Bring Your Own Package
Congratulations on your Mirror Me Booth! 🎉 This guide is for operators who purchased the Bring Your Own Package: you supply the computer, camera, printer, strobe, beauty dish, and
Mirror Me Booth Overview
The Mirror Me Booth is Foto Master’s original full-length interactive mirror photo booth and one of the most recognized mirror booth experiences in the event industry. It combines
Mirror Me Booth: Setup Checklist
Before You Start Complete this checklist before every deployment. Allow 45–60 minutes for a first-time setup, 20–30 minutes once you're familiar with the booth. Required before set
Mirror Me Booth: Software Setup
Mirror Me Booth runs on FMX for Windows. Foto Master's photo booth software. This guide covers everything from installation to running your first test session, so you have one plac