Retro Mirror Booth: Calibrating the Touch Screen
This guide covers touch-screen calibration for a Retro Mirror Booth with a confirmed XT Controller. Retro uses XT touch foil from April 2019, as confirmed by Foto Master Support on 7 September 2026. For an earlier, second-hand or modified unit, identify the installed controller first; see the controller and purchase-date reference. These are not ET or SiS instructions. A video walkthrough is available at the bottom of this article.
- Make sure your touch screen is connected directly to the computer's USB port.
- Download the XT Controller driver from here and open the application.
- Click on "Graph" and set the Threshold to 7.
- Click "Calibrate" and complete all targets displayed by the XT utility. Follow the installed version's prompts rather than assuming a fixed number of circles.
You can see all the steps in the video below:
Can't see the video? Watch on YouTube
Was this helpful?
Related articles
Retro Mirror Booth: Turn Key Package
Congratulations on your Retro Mirror Booth! 🎉 Your Turn-Key package includes the full booth, computer, Godox strobe, camera, printer, and starter media. Complete Package Contents
Retro Mirror Booth: Bring Your Own Package
Congratulations on your Retro Mirror Booth! 🎉 This guide is for operators who purchased the Bring Your Own Package: you supply the computer, strobe, camera, printer, and media. Ti
Retro Mirror Booth Overview
What Is the Retro Mirror Booth? The Retro Mirror Booth is Foto Master’s vintage-style mirror photo booth, designed for operators who want the power of a modern interactive mirror b
Retro Mirror Booth: Setup Demonstration
This video walks through the complete setup process for the Retro Mirror Booth: from unboxing and assembly to powering on for the first time. Can't see the video? Watch on YouTube
Retro Mirror Booth: Setup Checklist
Assembly Handle the decorative frame with care during assembly; the ornate design can be fragile at protruding points. Set up on a flat, stable surface. Extend and lock the base. A