Air Graffiti Wall: Bring Your Own Package

Congratulations on your Air Graffiti Wall! 🎉

The Air Graffiti Wall Bring Your Own (BYO) package includes the core hardware enclosure and spray can controllers. You supply the projector, laptop, camera, and printer — giving you flexibility to use equipment you already own or source locally.

What Is Included

Item	Details
Rear Screen Enclosure	The projection screen frame and enclosure structure
2× Digital Spray Cans	Wireless spray can controllers
Digital Receiver	Wireless receiver for the spray can controllers
AGWall Software License	One Year Free
24/7 Support & Software Upgrades	One Year Free
Foto Master Cloud AI Platform	Basic Plan: One Year Free
Marketing Materials	Photos, Videos, and Hardware Branding
Personal Training Session	Online (60 min)
Training Guides, Videos & Knowledgebase	Unlimited Access

What You Need to Source

Item	Recommended
Short-throw Projector	3,000+ lumens, HDMI input
Laptop	i5 processor or higher, Windows 10/11
DSLR Camera	Canon EOS Rebel T7 with 18-55mm Lens (or compatible)
Dye Sub Printer	DNP RX1HS
Printer Media	DNP 4 × 6" Media Set

Getting Started

Once you receive your package:

1. Unbox and inspect — Verify you received the enclosure, spray cans, and digital receiver
2. Set up the projector — Position the short-throw projector to fill the rear projection screen
3. Connect the laptop — Install AGWall software and connect via HDMI to the projector
4. Pair the spray cans — Connect the digital receiver to the laptop USB and pair the controllers
5. Connect the camera — Attach via USB and verify it is detected in AGWall
6. Connect the printer — Install drivers and configure the print queue in AGWall
7. Run a test session — Spray a design, verify projection, and print a test strip

For full setup instructions, see the Air Graffiti Wall Setup Checklist.