Retro Newspaper Booth: Hardware Setup

Updated 3 days ago · 1 min read

This guide covers how to set up the Retro Newspaper Stand and the Retro Roamer before your first event.

Note: The Retro Newspaper Stand weighs 99.2 lbs (45 kg). Use the included 3-in-1 hand truck to move it, and have a second person help when lifting it.

Set Up the Retro Newspaper Stand

  1. Move the stand to its event location with the 3-in-1 hand truck.
  2. Remove the soft case.
  3. Place the stand on a flat, stable surface near a power outlet.
  4. Unlock the display window and check that it opens and closes smoothly. 
  5. Lift the lid and confirm the paper area is clear.

Set Up the Retro Roamer

  1. Install the DSLR camera inside the Retro Roamer body.
  2. Connect the camera to the iPad mini.
  3. Mount the iPad mini in the holder on the back of the Retro Roamer.
  4. Flip the iPad holder down to check that it moves freely and faces the guest.
  5. Attach the brass lens hood and confirm the flash reflector is secure. 

Note: The iPad holder is built for the iPad mini with the A17 Pro chip and an 8.3-inch (211 mm) screen. Other iPad mini models will not fit.

Next, install the printer in the stand by following Retro Newspaper Booth: Printer Setup.

Was this helpful?

Related articles