Tower Mirror Booth: Turn Key Package

Congratulations on your Tower Mirror Booth! 🎉

Your Turn-Key package includes the complete Tower Mirror Booth, computer, camera, printer, and starter media.

---

Complete Package Contents

#	Item	What it's for
1	Tower Mirror Booth	The main booth unit (ships on side-wheels in crate)
2	High End i7 Mini PC	Booth computer running FMX for Windows
3	Canon EOS Rebel T7 DSLR Camera (18–55mm)	Photo capture
4	DNP DS-RX1HS Printer	Dye-sublimation photo printing
5	DNP 4×6″ Media Set (1,400 prints)	Starter paper and ribbon

Also included: Photo Booth Software License (1 yr) · 24/7 Support & Lead Distribution (1 yr) · Cloud Basic (1 yr) · Marketing & Training

---

Key Items to Know

High End i7 Mini PC: The booth computer runs FMX for Windows. On first launch, enter your Foto Master Cloud email and password to activate your license.

Canon DSLR Camera: Connect directly to the PC via USB — not through a USB hub — to avoid power and detection issues. Set Auto Power Off → Disabled in the camera menu.

Removing from Crate: The booth ships on side-wheels inside a crate. Lift from the top pair of wheels until vertical. Use an Allen/Hex key to remove the side wheels, then release the captive screws and black knobs to deploy the flash reflector.

Touch Screen: Requires the ET Controller driver installed before calibration. The setup checklist includes the download link.

DNP DS-RX1HS Printer: Uses only DNP RX1HS (4×6) media. Starter set covers up to 1,400 prints. Never load incompatible media — it will damage the printer.

---

Quick Start: What to Do Next

Follow these steps to get your booth up and running:

1. Verify your shipment — Unbox everything and confirm all items above are present and undamaged. Contact support@fotomaster.com immediately if anything is missing.
2. Setup Checklist
3. Software Setup
4. Running Your First Event