Air Graffiti Touch Calibration
This guide covers installation, calibration, and software setup for the AIR Graffiti touch overlay.
Download and Installation
- Connect the PQLabs touch overlay directly to the computer.
- Download and install PQLabs MultiTouchPlatform and restart your computer.
- Open C:\Program Files (x86)\PQLabs\MultiTouchPlatform, right-click on MultiTouchPlatform.exe, and create a shortcut on your desktop.
- Open MultiTouchPlatform. Make sure that the Device is connected (see blue arrow) and press Calibrate → Calibrate Position (see the orange mark).
- Four white (+) signs will appear. Use your finger to press each (+) sign for 1–2 seconds, until it turns green, then release.
- Close the calibration software.
Software Settings
Open the AIR Graffiti software → open the settings menu (Ctrl+O) → select Mouse Technology.
Was this helpful?
Related articles
Printer Comparison: DNP Models for Photo Booths
Overview DNP photo printers are widely used by photo booth operators because they are dependable, event-ready, and produce professional dye-sublimation prints. FMX supports printin
Choosing the Right Camera for Your Photo Booth
Your camera is the single most important component affecting photo quality in your booth. Foto Master supports a wide range of cameras from Canon, Nikon, Sony, and USB webcams -- b
Camera Basics for Photo Booth Operators
You do not need to be a professional photographer to run a great photo booth, but understanding a few camera fundamentals will help you deliver consistently high-quality photos acr
FMX Supported Camera List
FMX supports cameras from Canon, Nikon, and Sony via their respective manufacturer SDKs, as well as any UVC-compliant USB webcam. This article provides the full compatibility list,
Camera Basics: The Exposure Triangle
This video explains the exposure triangle — aperture, shutter speed, and ISO — and how each setting interacts to control the final look of your photo. Recommended for operators who