FMX Supported Camera List

Updated 2 weeks ago · 10 min read

FMX supports Canon, Nikon, Sony, and GoPro cameras. FMX for Windows also supports UVC-compliant USB webcams, while FMX for iPadOS can use the iPad's built-in cameras. Support and setup differ by platform, so confirm both the camera and the FMX device before purchasing equipment.

Platform Compatibility at a Glance

Camera sourceFMX for WindowsFMX for iPadOSConnection
Built-in iPad cameraNoYesBuilt into the iPad
Canon DSLR/MirrorlessYesYes, on compatible bodiesUSB tethering
Nikon DSLR/MirrorlessYesYes, on compatible bodiesUSB PTP/tethering
Sony MirrorlessYesYes, on compatible bodiesUSB remote/PTP; normally PC Remote on the camera
GoProHERO9 Black and newerYes; HERO13 Black is hardware-verifiedUSB-C with USB Connection: GoPro Connect
UVC USB webcamYesNo generic UVC webcam sourceUSB

The Canon, Nikon, and Sony model lists below describe Windows SDK compatibility. iPadOS discovers compatible cameras over USB and enables the features that each body reports. A model appearing in the Windows list does not by itself guarantee iPadOS compatibility. For iPad event equipment, test the exact camera body, firmware, cable, adapter, and workflow together before the event.

Integration Levels

Windows camera integrations generally fall into two levels:

  • Full SDK integration -- Complete tethered control including live view, autofocus control, capture trigger, image download, and camera settings adjustment (ISO, aperture, shutter speed, white balance) directly from FMX. This is the recommended level for professional booth operation.
  • Basic tethered integration -- Tethered capture and image download. Live view and some advanced settings may be limited depending on the camera model and SDK capabilities. Photos are captured and transferred to FMX, but fine camera control may need to be done on the camera body itself.

Canon -- Full SDK Integration

SDK: Canon EDSDK 13.19.10

Canon cameras offer the most complete integration with FMX. All models listed below support full tethered control including live view, remote capture, settings adjustment, and direct image download. Canon is the most popular camera brand among Foto Master booth operators.

Canon EOS R System (Mirrorless)

ModelSensorIntegration LevelNotes
EOS R1Full FrameFull SDKFlagship mirrorless, fastest AF
EOS R5 Mark IIFull FrameFull SDKHigh resolution, 8K video capable
EOS R5Full FrameFull SDK45MP, excellent for large prints
EOS R6 Mark IIFull FrameFull SDKOutstanding low-light performance
EOS R6Full FrameFull SDKGreat all-around booth camera
EOS R3Full FrameFull SDKProfessional speed and AF tracking
EOS R8Full FrameFull SDKCompact full-frame, budget-friendly
EOS RFull FrameFull SDKFirst-gen R mount, still reliable
EOS RPFull FrameFull SDKMost affordable full-frame Canon
EOS R50APS-CFull SDKCompact, lightweight, entry-level mirrorless
EOS M50APS-CFull SDKPopular compact mirrorless
EOS M6 Mark IIAPS-CFull SDKCompact body, strong sensor

Canon EOS DSLR

ModelSensorIntegration LevelNotes
EOS 1D X Mark IIIFull FrameFull SDKTop-tier professional DSLR
EOS 1D X Mark IIFull FrameFull SDKProfessional workhorse
EOS 5D Mark IVFull FrameFull SDKVery popular for booths, proven reliability
EOS 5DSFull FrameFull SDK50.6MP, highest resolution Canon DSLR
EOS 5DS RFull FrameFull SDK50.6MP without low-pass filter
EOS 6D Mark IIFull FrameFull SDKAffordable full-frame DSLR
EOS 7D Mark IIAPS-CFull SDKFast burst, rugged build
EOS 90DAPS-CFull SDKStrong all-around APS-C
EOS 80DAPS-CFull SDKReliable mid-range
EOS 77DAPS-CFull SDKGood entry point for booth use
EOS 850DAPS-CFull SDKRecent entry-level with modern AF
EOS 800DAPS-CFull SDKCapable entry-level
EOS 760DAPS-CFull SDKBudget-friendly with good features
EOS 750DAPS-CFull SDKAffordable and reliable
EOS 250DAPS-CFull SDKSmallest and lightest Canon DSLR
EOS 200DAPS-CFull SDKCompact DSLR, great value

Tip: For booth operators choosing a Canon camera, the EOS R6 Mark II and EOS 5D Mark IV are the most popular choices. The R6 Mark II offers outstanding autofocus and low-light performance in a mirrorless body, while the 5D Mark IV is a proven, reliable DSLR that has been used in thousands of booths worldwide.

Nikon -- Basic Tethered Integration

SDK: MAID Type0016

Nikon cameras connect to FMX using the MAID SDK. Integration is at the basic tethered level -- FMX can trigger the shutter and download captured images, but live view support and remote settings control are limited compared to Canon. Set your camera settings (ISO, aperture, shutter speed, white balance) directly on the camera body before starting your event.

Capture mode: JPEG or JPEG+RAW only. FMX downloads the JPEG for processing. If you shoot JPEG+RAW, both files are captured but FMX uses the JPEG.

Supported Nikon Models

ModelSensorIntegration LevelNotes
D2HFull FrameBasic tetheredLegacy professional
D2HsFull FrameBasic tetheredUpdated D2H
D2XFull FrameBasic tetheredHigh resolution legacy
D2XsFull FrameBasic tetheredUpdated D2X
D3Full FrameBasic tetheredProfessional, excellent high ISO
D3SFull FrameBasic tetheredLow-light specialist
D3XFull FrameBasic tetheredHigh resolution professional
D4Full FrameBasic tetheredProfessional workhorse
D4SFull FrameBasic tetheredUpdated D4
D5Full FrameBasic tetheredTop-tier Nikon DSLR
D500APS-CBasic tetheredProfessional APS-C
D600Full FrameBasic tetheredEntry full-frame
D610Full FrameBasic tetheredUpdated D600
D700Full FrameBasic tetheredClassic full-frame
D750Full FrameBasic tetheredPopular mid-range full-frame
D780Full FrameBasic tetheredModern mid-range full-frame
D800Full FrameBasic tetheredHigh resolution
D800EFull FrameBasic tetheredNo low-pass filter
D810Full FrameBasic tetheredExcellent image quality
D850Full FrameBasic tetheredOutstanding all-around DSLR
D7000APS-CBasic tetheredMid-range APS-C
D7100APS-CBasic tetheredSolid mid-range
D7200APS-CBasic tetheredUpdated D7100
D7500APS-CBasic tetheredModern mid-range APS-C
D3200APS-CBasic tetheredEntry-level
D3300APS-CBasic tetheredUpdated entry-level
D3400APS-CBasic tetheredBudget-friendly
D3500APS-CBasic tetheredMost recent budget Nikon
D5200APS-CBasic tetheredMid-range entry
D5300APS-CBasic tetheredWi-Fi enabled
D5500APS-CBasic tetheredTouchscreen
D5600APS-CBasic tetheredModern entry-mid range

Tip: If you are currently using a Nikon camera and want the full FMX integration experience (live view, remote settings, full tethered control), consider switching to a Canon EOS R system camera. The difference in software integration is significant for daily booth operation.

Sony -- Basic Tethered Integration

SDK: Sony Camera Remote SDK (CrSDK)

Sony cameras connect to FMX using the CrSDK. Integration is at the basic tethered level, similar to Nikon. FMX can trigger capture and download images, but live view and remote settings control may be limited depending on the model. Set camera settings on the camera body before your event.

Supported Sony Models

SeriesModelsSensorIntegration LevelNotes
A7A7, A7 II, A7 III, A7 IVFull FrameBasic tetheredVersatile full-frame mirrorless
A7RA7R, A7R II, A7R III, A7R IV, A7R VFull FrameBasic tetheredHigh resolution variants
A7SA7S, A7S II, A7S IIIFull FrameBasic tetheredLow-light / video specialists
A9A9, A9 II, A9 IIIFull FrameBasic tetheredHigh-speed professional
A1A1Full FrameBasic tetheredFlagship, all capabilities

Tip: Sony's eye autofocus is among the best in the industry, which is excellent for booth use. However, keep in mind that the basic tethered integration means you will need to set up the camera manually before each event rather than controlling it from FMX.

GoPro -- USB Integration

GoPro cameras connect directly by USB-C using the Open GoPro protocol. FMX for Windows supports GoPro HERO9 Black and newer; HERO13 Black is the primary hardware-verified model for FMX for iPadOS. Test other Open GoPro-compatible models with your complete iPad setup before using them at an event.

GoPro support includes Live View, Take Photo, native video recording, and automatic media download. Photos and videos are captured by the GoPro at the quality configured on the camera and then transferred to FMX.

GoPro Requirements

  • Set USB Connection on the GoPro to GoPro Connect, not MTP.
  • Insert a formatted SD card with enough free space. GoPro photo and video capture requires the card.
  • Use a known-good USB-C data cable, not a charge-only cable.
  • Set photo quality, video resolution, frame rate, lens, and stabilization on the GoPro itself.
  • On iPadOS, allow FMX local-network access when prompted. The GoPro control connection travels over the USB network interface.

When Delete files from SD card after download is enabled, FMX removes each GoPro file only after verifying that it was downloaded. For native GoPro video, audio comes from the GoPro's microphones rather than the computer or iPad microphone.

Troubleshooting: If GoPro still capture works on Windows but Live View does not, allow FMX through Windows Firewall and test again. If the camera is not detected on either platform, recheck GoPro Connect, the SD card, and the USB data cable.

For the full Windows setup, native capture behavior, audio, automatic deletion, and UDP troubleshooting, see How to Connect and Use a GoPro with FMX for Windows. Canon operators who want to use the camera's physical shutter should also read How to Use the Canon Camera Shutter in FMX for Windows.

USB Webcams -- UVC Integration

Protocol: UVC (USB Video Class)

Any webcam that is UVC-compliant will work with FMX. This includes most USB webcams sold today from brands like Logitech, Razer, Microsoft, and others.

How Webcam Integration Works

  • FMX accesses the webcam's live video feed directly via the UVC protocol
  • No manufacturer SDK or special driver is required -- Windows built-in UVC drivers handle the connection
  • FMX captures frames from the live feed for photos
  • Resolution and quality depend entirely on the webcam hardware

Webcam Limitations

  • Image quality is significantly lower than DSLR or mirrorless cameras. Webcams have small sensors and basic lenses.
  • No flash sync -- Webcams cannot trigger an external flash/strobe. You must rely on continuous LED lighting.
  • Limited control -- Basic exposure and white balance adjustments may be available, but nothing close to the control you get with a dedicated camera.
  • Rolling shutter -- Most webcams use rolling shutter sensors, which can cause distortion with fast movement.

Best Webcam Use Cases

  • Testing and development of booth software and templates
  • Budget-conscious setups where print quality is not a priority
  • Casual, low-expectation events
  • Backup camera in case of primary camera failure

Tip: If you are just starting out and want to test FMX before investing in a DSLR or mirrorless camera, a USB webcam is a fine way to learn the software. But plan to upgrade to a Canon DSLR or mirrorless camera before your first paid event -- the quality difference is immediately obvious to guests.

Camera Connection Checklist

Before every event, run through this checklist to make sure your camera is properly connected to FMX:

  1. Camera powered on with a full battery or connected to AC power
  2. Memory card inserted when the selected camera requires one, especially Nikon, Sony, or GoPro
  3. USB data cable connected securely between the camera and the Windows PC or physical iPad
  4. Camera set to the correct mode -- Manual (M) for consistent DSLR/mirrorless results, PC Remote for Sony, or GoPro Connect for GoPro
  5. Camera detected in FMX -- Open Global Settings > Camera, refresh the list, and select the camera
  6. Connection ready -- Confirm the selected camera reports a ready connection
  7. Live View working -- Confirm that the guest preview appears
  8. Test capture -- Take a test photo and verify that it reaches the workflow
  9. Video test, if used -- Record, stop, and play a short test with audio
  10. Full workflow test -- Complete the guest flow through processing, sharing, and printing

For iPad setup instructions, see Camera Settings in FMX for iPad. For Windows setup, see Camera Setup and Configuration.

Was this helpful?

Related articles