Using Photo Strips Preset alongside 4x6 Preset in Multi Presets Selection

Overview

This guide explains how to print both 4x6 and photo strips at the same event using Foto Master software.

Setup Instructions

1. Create Photo Strips Layout

First, establish a photo strips layout. Refer to the dedicated article for detailed guidance on this process.

2. Printer Configuration

Enable a 2-inch cut in your printer preferences. Follow the step-by-step instructions in the relevant article, specifically the section titled "Enabling 2-inch cut for a virtual copy of your printer."

3. Workflow Tab Settings

For each preset you've created:

• Access the Workflow tab and navigate to the Print Copies feature
• Press the settings icon
• Select the designated printer for that specific preset
• If you enabled printer global settings from the Settings tab, disable this option

Example Configuration:

• Regular 4x6 layout: Select "DS-RX1"
• Photo Strips preset: Select "DS-RX1 Strips" (the virtual printer copy with 2-inch cut enabled)

4. Multi Presets Setup

Create a multi-preset selection containing both your standard 4x6 layout and photo strips configuration. Consult the multi-presets feature setup instructions for detailed steps.

---

Result: You can now efficiently print both 4x6 and photo strip formats at a single event.

---