Draw Me Bot Troubleshooting
Use these quick checks when Draw Me Bot is not ready for guests.
The Booth Does Not Power On
Check the wall outlet, power strip, power cable, and any internal power switch. If the booth uses a computer or iPad, confirm that device is charged or connected to power.
The Camera or Device Is Not Detected
Disconnect and reconnect the USB cable or device mount, restart the booth software, and confirm the camera or iPad appears in the relevant device settings.
Photos Are Not Reaching the Gallery
Check internet connection, Cloud login, selected event, and sync status. Run one new test capture after reconnecting.
The Guest Screen Looks Wrong
Confirm the selected preset, display orientation, screen resolution, and external monitor settings. Re-sync the event if the layout was edited in Cloud.
When to Contact Support
Contact support when the same issue repeats after restart, cable checks, and a successful internet test. Include the booth model, event name, software version, and a photo or screenshot of the issue.
Was this helpful?
Related articles
Booth Computer Running Slowly at Events
Common Causes Windows Update downloading in the background Antivirus scanning during the event Low disk space on the system drive Too many hours without a restart: memory buildup I
TV Display \ No Signal Troubleshooting
This guide helps you troubleshoot display issues on your computer's TV/monitor. First, make sure the TV is powered. If it doesn't turn on, try a different power outlet. Steps 1. Ma
AI Credits Missing or Not Deducting
AI Credits power every Cloud AI feature on Foto Master -- background removal, AI headshot, Draw Me, SMS, and more. When credits look wrong on your dashboard, possible causes includ
Event Not Syncing to FMX
You created an event in the Foto Master Cloud, opened FMX on your booth, and... nothing. The event is not in the list, or it is there, but the workflow shows up empty, or you get a
Photos Taken But Not Printing
Quick Checks First Is the printer powered on with the ready light solid? Is paper loaded with the ribbon from the same box? Is the USB cable connected between the printer and booth